Decal Apply Instructions



Watch this video or read the guide below for details on how to apply your decal.
The most important above all else is going slow and taking your time.

How to apply the Decal:

Surface Preparation:

  1. Clean the desired surface with rubbing alcohol for optimal results.
  2. Just using some dish soap and water for glass surfaces or window cleaner works as well.

Backing Paper Removal:

  1. Carefully remove the backing paper which is the material on the side facing away from the decal and transfer tape (the clear layering).
  2. If any part stays on the backing paper, reposition it, press firmly, and try again. Alternatively, flip the decal face down for an easier process, especially for holo and opal colors.

Applying Your Decal:

  1. Slowly place and lower the decal onto your surface.
  2. Scrape the entire surface of the decal (keeping the transfer tape on) firmly with a credit card for strong adhesive bonding.
  3. Allow the decal and tape to sit for a few minutes, especially for holos and opals.
  4. Slowly peel off the clear transfer tape from the decal. Removing it nearly parallel to the surface prevents pieces from sticking to the tape.
  5. If any pieces lift, lower the tape back down, press firmly, and retry.
  6. Once the transfer tape is completely removed you are done!

Essential Aftercare:

  1. Leave for 24 hours before washing
  2. Feel free to wash the decal at any time but be sure NOT to use a towel when doing so. Doing so could risk peeling part of the decal.
  3. To remove the decal you can just peel it off. For window applications, use a window cleaner or a soap/water mixture along with a razor blade for intricate decals. Afterwards use the same techniques as before to re-clean the surface of adhesive residue.

Thank you for choosing our decals!